Nom de marque: | PERFLEX |
Certification: | CE/ROHS/ISO9001 |
Numéro de modèle: | PXF-500/SIKA 315 |
Quantité de commande min: | 200 seaux |
---|---|
Détails d'emballage: | 5 L/10L/20L par seau |
Délai de livraison: | 7days autour |
Capacité d'approvisionnement: | 20000 tonnes annuellement |
Matériel: | Durcisseur de résine + d'isocyanate de Polyaspartic | Rapport de mélange: | : B : C= 100 : 20h50 |
---|---|---|---|
Couleur: | Transparent | Caractéristique: | Bon collage | résistance aux intempéries |
PAQUET: | 5L | 10L | 20L/seau | Application: | Parc | Route | Jardin | Plancher de piscine |
Surligner: | Revêtement micro de plancher de Polyaspartic de perle,Haut revêtement de plancher de Polyaspartic de résistance à l'usure,Revêtement micro de Polyaspartic de perle |
PXF-500 High Wear Resistance Polyasartic Flooring Coating - Micro Bead | weather resistance | Ultra clear
INTRODUCTION: PXF-500 is a three-component reaction curing transparent floor coat made of polyaspartic resin, HDI hardener and organic micro bead materials, with sepcial organic micro bead and multi-functional chemical, it can provide strong adhesion and substrate adhesion when overcoat on epoxy or polyurethane substrate, and super wear and scratch resistance of the coating layer. It’s has good anti- QUV properties, anti-aging and yellowing resistance and chemical resistance performance, the best choice for heavy duty vehicle flooring indoor or outdoor.
FEATURE
1- Low maintenance
2- Excellent UV resistance
3- Low VOC-content, low odor
4- Durable, impermeable and seamless
5- Smooth glossy finish, optional slip resistant semi-gloss finish
6- Unique UV blocker technology provides superior ultraviolet light screening
APPLICATION: Typically used in light to heavy-duty traffic areas
▪ Laboratories, Life Sciences, Pharmaceutical industries and Health Care industry.
▪ Education (e.g. Schools and Universities).
▪ Leisure & Culture (e.g. Museums, Stadiums).
▪ Retail (e.g. Shopping Malls).
▪ Manufacturing facilities and warehouses.
Part A | Resin | Part B | Hardener |
Appearance | Transparent | Appearance | Transparent |
Viscosity 25 ℃ | 1200mpas | Viscosity 25 ℃ | 12mpas |
Specific gravity 25 ℃ | 1.15 | Specific gravity 25 ℃ | |
Solid content | 99% | Solid content |
Part D: Organic Micro Bead Materials
PROPERTIES AFTER CURING
7-day hardness | Shore D 68 |
Abrasion (CS17 wheel 750g, 500r) / Mg | 25 |
Elongation at break (%) | 15 |
Tensile strength (MPA) | 23 |
Concrete adhesion (MPA) | 2.2 |
Acid resistance | no change in 5% sulfuric acid |
Alkali resistance | no change in 10% sodium hydroxide |
Impact resistance (1000g, 1m) | Pass |
- BLEND RATIO BY WEIGHT
A : B : D = 100 : 20 : 50
- WORKING TIME
Temperature (℃) | 25 | 30 | |
Mixed service life (min) | 20 | 15 |
- CONSTRUCTION CONDITIONS
Construction amount: strictly control the amount in 0.05 ~ 0.1kg/m2 to avoid accumulation, otherwise the foaming is serious
Construction conditions:
Ambient temperature: 0 ℃ - 35 ℃, ambient humidity: ≤ 85%
Substrate temperature: must be more than 3 ℃ above air dew point temperature
Cleaning agent: Asparagus polyurea standard diluent
Note: this material has very high requirements for construction, and can only be operated after professional training of our company before use.
- DRY TIME AND RECOAT INTERVAL
Temperature (℃) : 25
Walking opening hours (HRS): 8
Vehicle opening hours (HRS) : 2
Recoat interval hours (HRS): 2
The above data is only for guidance, and the real curing time is highly related to the ambient temperature and humidity.
- SURFACE TREATMENT
Clean water to remove salt and other water-soluble contaminants.
Use proper detergent and degreaser to remove grease.
Clean and dry the surface before construction.
Pay attention to the painting interval between the primer and the construction.
Storage time: 12 months
Storage temperature: 5 ℃ - 35 ℃
Part A: 3kg | Part B: 0.6kg | Part D: 1.4kg
Personne à contacter: Laura
Répondent-: Tchang-cha. Hunan Chine
Adresse usine:Zone industrielle de Baofeng, comté de Shashi, ville de Liuyang Tchang-cha, Hunan Chine